The cyclone dust collector is composed of upper box, middle box, ash bucket, diversion pipe, support, filter bag assembly, injection device and ash discharge valve. Dust-containing gas enters the dust hopper of each unit through the guide pipe. Under the guidance of the guide board of the dust hopper, the large particle dust falls directly into the dust hopper after separation, and the rest of the dust enters the filter area of the central box with the airflow. The filtered clean gas filter bag is discharged through the upper box, lift valve and exhaust pipe.

Product overview

Cyclone dust collector can be used as a single, can also be multi-cylinder combination, by a common air in and out of the connection of the mother tube, to meet the treatment of any amount of smoke. The monomer of each precipitator has four parts: body, core tube and sealing dust collecting device with good performance. According to the installation location, there are four kinds of structures of the cyclone dust collector, that is, according to the inlet direction of the dust collector, there are two kinds of left-handed and right-handed; According to different needs, there are two kinds of ash bucket type A and ash box type B.

Working principle of cyclone dust collector:

When the dust-containing gas enters the cyclone dust collector through the tangential direction of the contraction inlet, it rotates in a spiral form from top to bottom. Under the action of centrifugal force, the dust particle is thrown to the wall of the device and rotates downward along the wall to enter the sealed dust collector with special structure. The purified gas is discharged through the core tube by means of internal spiral rotation from bottom to top.